SF07A17 Deep Groove Ball Bearing
With over 10170 full-service stores, our SF07A17 Deep Groove Ball Bearing inventory is extensive and 200 mm D our parts are priced right. within 24 Industrial Bearings Solutions hours. This helps you maximize your productivity by saving 130 mm d time and your hard-earned dollars.
Product Details
d | 130 mm |
D | 200 mm |
B | 33 mm |
d1 | 151.6 mm |
d2 | 151.6 mm |
D1 | 178.4 mm |
b | 3.1 mm |
C1 | 17.9 mm |
C2 | 6.6 mm |
C3 | 5.6 mm |
r1,2 min. | 2 mm |
r3,4 min. | 1 mm |
a | 55.2 mm |
da min. | 139 mm |
db min. | 139 mm |
Da max. | 191 mm |
Db max. | 195 mm |
ra max. | 2 mm |
rb max. | 1 mm |
dn | 156.4 mm |
Basic dynamic load rating C | 140 kN |
Basic static load rating C0 | 150 kN |
Fatigue load limit Pu | 4.9 kN |
Attainable speed for grease lubrication | 7500 r/min |
Attainable speed for oil-air lubrication | 12000 r/min |
Ball diameter Dw | 22.225 mm |
Number of balls z | 21 |
Reference grease quantity Gref | 42 cm³ |
Preload class A GA | 900 N |
Static axial stiffness, preload class A | 392 N/µm |
Preload class B GB | 1800 N |
Static axial stiffness, preload class B | 511 N/µm |
Preload class C GC | 3600 N |
Static axial stiffness, preload class C | 677 N/µm |
Preload class D GD | 7200 N |
Static axial stiffness, preload class D | 917 N/µm |
Calculation factor f | 1.15 |
Calculation factor f1 | 0.99 |
Calculation factor f2A | 1 |
Calculation factor f2B | 1.02 |
Calculation factor f2C | 1.05 |
Calculation factor f2D | 1.08 |
Calculation factor fHC | 1.02 |
Calculation factor e | 0.68 |
Calculation factor (single, tandem) Y2 | 0.87 |
Calculation factor (single, tandem) Y0 | 0.38 |
Calculation factor (single, tandem) X2 | 0.41 |
Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
Mass bearing | 2.67 kg |