Bearing Bore seal 592 O-ring	A:30 mm; e:19 mm; C:14 kN; T min.:-20 °C; B1:35 mm; Designation of housing:FE205-; s1:18.5 mm; L:95 mm; G:R1/8"; B:21 mm;
Bearing Bore seal 568 O-ring	N:14mm; Z:30.9 mm; e:20 mm; A:33.7 mm; A1:12.5 mm; d:35 mm; T min.:-20 °C; Designation of housing:FLE207N-; B:25.4 mm; Weight:1.1 kg;
Bearing Bore seal k160938 O-ring	Dz:60 mm; Designation of bearing:UC205-16G2T04; C0:7.88 kN; G:M6x1; Designation of closed end cover:SCC205; B:34 mm; Weight:0.64 kg; A2:35.7 mm; J:99 mm; H:130 mm;
Bearing Bore seal k160971 O-ring	Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Flange O.D. H(φ):60; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Bearing Retained:No; Days to Ship:7 Days;
Bearing Bore seal k158926 O-ring	A2:127 mm; d:105 mm; G:M10x1; J:360 mm; L:270 mm; T max.:200 °C; A1:40 mm; e:59 mm; Weight:25 kg; S:44 mm;
Bearing Bore seal O-ring	A2:127 mm; d:105 mm; G:M10x1; J:360 mm; L:270 mm; T max.:200 °C; A1:40 mm; e:59 mm; Weight:25 kg; S:44 mm;
Bearing Bore seal O-ring	A:48 mm; C0:37.8 kN; A2:70 mm; s1:46.8 mm; J:132 mm; A1:20 mm; e:28 mm; Weight:4.63 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;
Bearing Bore seal k161682 O-ring	s1:19.05 mm; A:30.5 mm; S:15.9 mm; C:15.3 kN; Weight:1.33 kg; N:12 mm; Recommended tightening torque for set screw:3.9 Nm; A1:14 mm; B:38.1 mm; Designation of bearing:SUC206-19;
Bearing Bore seal O-ring	Da - Cup Frontface Backing Diameter:3.46 in; Cg - Geometry Factor:0.0805; Y - ISO Factor3:2.11; e - ISO Factor2:0.28; Cup Part Number:432X; C - Cup Width:1.0313 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:3.19 in; Series:435; D:3.7500 in;
Bearing Bore seal k161828 O-ring	Lockwasher and Lockplates:W-12; Taper:1:12; Bearing Number:22312K; Sleeve:S-112; Locknut:N-12; Diameter d :2 1/16 in; S:0.594 in; Tolerance1:-0.004 in; Series:223K and 232K; SNW/SNP Assembly Weight:1.06 lb;
Bearing Bore seal O-ring	A:48 mm; C0:37.8 kN; A2:70 mm; s1:46.8 mm; J:132 mm; A1:20 mm; e:28 mm; Weight:4.63 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;
Bearing Bore seal k161380 O-ring	ra max:0.3 mm; B:5 mm; Fatigue limit load, Cu:0.04 kN; Mass:0.005 kg; Dynamic load, C:1.83 kN; da min:12 mm; D:19 mm; f0:14.8; Brand:NTN; Characteristic cage frequency, FTF:0.42 Hz;
Bearing Bore seal 1272 O-ring	Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Number of Bearings:Single; Width T(mm):14; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Days to Ship:7 Days;
Bearing Bore seal 622 O-ring	A:48 mm; C0:37.8 kN; A2:70 mm; s1:46.8 mm; J:132 mm; A1:20 mm; e:28 mm; Weight:4.63 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;