| Bearing B–8073–C | Volume Discount:Available; Type:Bearings with Housin; RoHS:6; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; |
| Bearing B–8424–C | Number of Bearings:Double; RoHS:6; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Volume Discount:Available; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):8; Flange O.D. H(φ):50; |
| Bearing H–2212–A | Z:70 mm; S:19 mm; C:31.85 kN; N:17mm; H2:108 mm; d:44.45 mm; J:146 mm; B:49.2 mm; L1:60 mm; N1:23 mm; |
| Bearing B–8750–G | S:9.5 mm; Designation of bearing:ES207G2T04; H3:90; A4:26 mm; Designation of open end cover:SCOE207-35; N:14mm; J:110 mm; A1:9 mm; C0:15.2 kN; Recommended tightening torque for set screw:11.5 Nm; |
| Bearing B–8424–C | Z:70 mm; S:19 mm; C:31.85 kN; N:17mm; H2:108 mm; d:44.45 mm; J:146 mm; B:49.2 mm; L1:60 mm; N1:23 mm; |
| Bearing B–8073–C | rs min:0.3 mm; Da max:38 mm; Cr:18 kN; Lubrication hole on inner ring:Oui/Yes; C:17 mm; F:35 mm; d:30 mm; Lubrication hole on outer ring:Oui/Yes; Characteristic outer ring frequency, BPF0:9.87 Hz; Brand:NTN; |
| Bearing B–8750–G | S:9.5 mm; Designation of bearing:ES207G2T04; H3:90; A4:26 mm; Designation of open end cover:SCOE207-35; N:14mm; J:110 mm; A1:9 mm; C0:15.2 kN; Recommended tightening torque for set screw:11.5 Nm; |
| Bearing B–8824–C | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2650 lbf; r - Cup Backface To Clear Radius2:0.06 in; R - Cone Backface To Clear Radius1:0.03 in; db - Cone Backface Backing Diameter:1.36 in; Cage Type:Stamped Steel; T1 - Bearing Width:0.8750 in; a - Effective Center Location3:-0.2 in; C0 - Static Radial Rating:15800 lbf; C - Cup Width:0.6875 in; Bearing Weight:1.3 lb; |
| Bearing H–2212–A | rs min:0.3 mm; Da max:38 mm; Cr:18 kN; Lubrication hole on inner ring:Oui/Yes; C:17 mm; F:35 mm; d:30 mm; Lubrication hole on outer ring:Oui/Yes; Characteristic outer ring frequency, BPF0:9.87 Hz; Brand:NTN; |
| Bearing A–5934–B | Weight:1.30 Kg; G:M80x2; D3:105 mm; Locknut:KM16; C:17 mm; L1:78.00 mm; Appropriate Hydraulic Nut:HMV16; d1:2 11/16 in; Lockwasher and Lockplates:MB16; |
| Bearing B–8824–C | L:70 mm; B:31 mm; S:12.7 mm; H:33.3 mm; H2:64 mm; C:12.8 kN; d:12.7 mm; Z:16.3 mm; T max.:100 °C; Weight:0.61 kg; |
| Bearing E–2004–C | Z:70 mm; S:19 mm; C:31.85 kN; N:17mm; H2:108 mm; d:44.45 mm; J:146 mm; B:49.2 mm; L1:60 mm; N1:23 mm; |