Bearing 29432EJ	Threads No. per Inch:5-ACME; E:20.510 in; Major Dia - d:19.682 in; D1:0.260 in; D:2.260 in; C:25.140 in; G:3.990 in; H:0.885 in;
Bearing 293/530EM	N:12mm; e:10 mm; L:100 mm; T max.:100 °C; T min.:-20 °C; S:6 mm; C0:4.78 kN; Weight:0.49 kg; A1:6 mm; H3:62;
Bearing 293/600EM	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):15; Holder Surface Treatment:Clear Anodize; Seals:VV (Non-Contact Rubb; C Chamfered:Not Provided; Bearing Material:[Steel] Steel;
Bearing 29320EJ	r - Outer Ring To Clear Radius3:1.0 mm; d:85 mm; Bearing Width:22 mm; do - Ball Diameter:11.1125 mm; Precision Class:ISO P4S (ABEC 7/9); Contact Angle:15 º; C0 - Static Radial Rating:29000 N; Design Units:METRIC; Limiting Speed (Grease):12600 rpm; D:130 mm;
Bearing 294/500EM	B:49.2 mm; T max.:100 °C; H:172 mm; A:36 mm; Recommended tightening torque for set screw:8.3 Nm; e:21 mm; Designation of bearing:SUC208-24; L:100 mm; J:144 mm; C0:19.3 kN;
Bearing 29430EJ	Max operating temperature, Tmax:120 °C; rs min:1.1 mm; D:62 mm; db min:32 mm; Characteristic cage frequency, FTF:0.39 Hz; Contact angle α:30 °; d1:39.1 mm; Brand:SNR; r1a max:0.6 mm; Characteristic outer ring frequency, BPF0:4.28 Hz;
Bearing 29320EJ	Flange O.D. H(φ):47; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Bearing I.D. d(mm):15; Width T(mm):10; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; RoHS:6; Type:Bearings with Housin;
Bearing 294/900EM	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):15; Holder Surface Treatment:Clear Anodize; Seals:VV (Non-Contact Rubb; C Chamfered:Not Provided; Bearing Material:[Steel] Steel;
Bearing 29480EM	Accessory:With steel plate cov; Unit Body Material:Cast Iron; Fit:J7; Basic Load Rating, Dynamic Rating(N):29100; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Seal:Silicone; d:35;
Bearing 292/1000EM	B:49.2 mm; T max.:100 °C; H:172 mm; A:36 mm; Recommended tightening torque for set screw:8.3 Nm; e:21 mm; Designation of bearing:SUC208-24; L:100 mm; J:144 mm; C0:19.3 kN;
Bearing 29380EM	Threads No. per Inch:5-ACME; E:20.510 in; Major Dia - d:19.682 in; D1:0.260 in; D:2.260 in; C:25.140 in; G:3.990 in; H:0.885 in;
Bearing 294/710EM	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):15; Holder Surface Treatment:Clear Anodize; Seals:VV (Non-Contact Rubb; C Chamfered:Not Provided; Bearing Material:[Steel] Steel;
Bearing 29338EJ	B:49.2 mm; T max.:100 °C; H:172 mm; A:36 mm; Recommended tightening torque for set screw:8.3 Nm; e:21 mm; Designation of bearing:SUC208-24; L:100 mm; J:144 mm; C0:19.3 kN;
Bearing 294/1000EM	Accessory:With steel plate cov; Unit Body Material:Cast Iron; Fit:J7; Basic Load Rating, Dynamic Rating(N):29100; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Seal:Silicone; d:35;