| Bearing 309733 | Inner/Outer Ring Material:Steel; RoHS:6; Specifications/Environment:Standard; Outer Ring Type:Flat; Number of Raceway Ring Rows:Single Row; Raceway Ring Shape:Tapered Roller; Load Direction:Radial; Rolling Element Material:Steel; |
| Bearing 511044A | Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Width T(mm):35 ～ 70; Bearing Part Number:6905; RoHS:6; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Square Type; Type:Bearings with Housin; |
| Bearing 305397D | J:193.7 mm; T min.:-20 °C; s1:32.55 mm; Recommended tightening torque for set screw:16.8 Nm; A:79.4 mm; Dz:120 mm; H2:138.1 mm; G:M6x1; S:25.4 mm; Designation of closed end cover:SCC212; |
| Bearing 305608A | Inner/Outer Ring Material:Steel; Combination of two pieces:Standard; Raceway Ring Shape:Cylindrical Roller; Load Direction:Radial; Large-capacity type:E (Large-capacity ty; Outer ring oil hole:Standard; Format symbol:NJ (double brims for; Rolling Element Material:Steel; Specifications/Environment:Standard; B:33; |
| Bearing 508893 | Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):17800; Seal:Silicone; Rolling Element Material:Bearing Steel; RoHS:6; Accessory:No Cover; Basic Load Rating, Dynamic Rating(N):29100; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; |
| Bearing 305183 | Number of Raceway Ring Rows:Single Row; Volume Discount:Available; Load Direction:Radial; Revolution Frequency (Grease)(rpm):28000; Precision:Grade 0; Basic Load Rating, Static Rating(N):1983; Size Standards:Metric System; Specifications/Environment:Standard; Retainer Type:Punching; |
| Bearing 3322 | e:33 mm; C0:51.8 kN; Designation of housing:F312-; L:193 mm; Designation of bearing:EX312-36G2L3; A1:22 mm; C:81.6 kN; J:150 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| Bearing 190BDY10E | Mass:0.02 kg; ra max:0.3 mm; f0:13.2; Characteristic cage frequency, FTF:0.38 Hz; da max:16 mm; Dynamic load, C:5.1 kN; rs min:0.3 mm; da min:14 mm; Fatigue limit load, Cu:0.11 kN; Brand:NTN; |
| Bearing 180BDY09E | e:33 mm; C0:51.8 kN; Designation of housing:F312-; L:193 mm; Designation of bearing:EX312-36G2L3; A1:22 mm; C:81.6 kN; J:150 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| Bearing 3324 | e:33 mm; C0:51.8 kN; Designation of housing:F312-; L:193 mm; Designation of bearing:EX312-36G2L3; A1:22 mm; C:81.6 kN; J:150 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| Bearing 3222 | e:33 mm; C0:51.8 kN; Designation of housing:F312-; L:193 mm; Designation of bearing:EX312-36G2L3; A1:22 mm; C:81.6 kN; J:150 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| Bearing 305283D | Designation of open end cover:SCOU207-22; C:25.7 kN; B:32 mm; H1:19 mm; Z:58.4 mm; J:127 mm; H:95 mm; Dz:80 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; |
| Bearing 305352 | Locknut:KM6; d1:15/16 in; Weight:0.12 Kg; Lockwasher and Lockplates:MB6; C:8 mm; D3:45 mm; L1:31.00 mm; G:M30x1.5; |
| Bearing 170BDZ10XE4 | Series:68000; Cup Part Number:68709; C - Cup Width:1.0000 in; Y - ISO Factor3:1.21; D:7.0856 in; Cg - Geometry Factor:0.103; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.030 in; Db - Cup Backface Backing Diameter:6.50 in; e - ISO Factor2:0.5; |
Double row angular contact ball bearings 52,53 - NTN Global
Double Row Angular Contact Ball Bearings. 1）Smallest allowable dimension for chamfer dimension r. φd ra r. φD. φDa φda. B a r ra. 0.68 1 0.92 0.67 1.41. Fa
Double Row Angular Contact Ball Bearings - NSK Europe
Benefits. Contact seals providing excellent protection against the ingress of contamination, reducing wear on the raceways and ball surface, reducing noise,
Double Row Angular Contact Ball Bearings - HVH Industrial
Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide or sheet steel cages. Their
Double-row Angular Contact Ball Bearings
Double-row Angular Contact Ball Bearings. Bore Diameter : 10∼50mm. 30. 30. 32. 32. 35. 35. 40. 40. 47. 47. 47. 52. 52. 52. 62. 62. 62. 62. 62. 72. 72. 72. 72. 72
Double Row Angular Contact Ball Bearings | AST Bearings
Double Row Angular Contact ball bearings have two rows of balls arranged back-to-back. The lines of action of the load at the contact between balls and
Double row angular contact ball bearings | SKF
The design of SKF double row angular contact ball bearings corresponds to two single row angular contact ball bearings arranged back-to-back. Product details
Double Row Angular Contact Ball Bearings - NBC Bearing
Double Row Angular Contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the