| Bearing 32032X | C0:29.2 kN; s1:22.65 mm; N1:26 mm; A:60 mm; J:170.5 mm; Designation of open end cover:SCO211-55; Z:78.9 mm; Dz:110 mm; C:43.55 kN; Weight:3.62 kg; |
| Bearing 32320 | Characteristic inner ring frequency, BPFI:8.89 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:52.6 kN; rs min:3 mm; e:0.32; Da max:166 mm; Y2:3.11; Characteristic rolling element frequency, BSF:5.1 Hz; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.41 Hz; |
| Bearing 30264 | r - Cup Backface To Clear Radius1:0.130 in; Cup Part Number:29620-B; Series:29600; G2 - Heat Generation Factor (Rib-Roller End):17.1; Cg - Geometry Factor6:0.117; Da - Cup Frontface Backing Diameter:4.35 in; D:4.4375 in; K - Factor2:1.2; G1 - Heat Generation Factor (Roller-Raceway)5:63.9; e - ISO Factor3:0.49; |
| Bearing 30238 | RoHS:6; Application:For Inner Ring; I.D. d(φ):25; Days to Ship:7 Days or more; O.D. D(φ):31; L(mm):2 ～ 100; L Dimension Tolerance:Positive Tolerance; Material:304 Stainless Steel; |
| Bearing 32334 | Static load, C0:20.2 kN; rs min:2 mm; d1:65.8 mm; Min operating temperature, Tmin:-20 °C; Brand:SNR; D1:92.9 mm; Da max:101 mm; Characteristic outer ring frequency, BPF0:4.72 Hz; ra max:2 mm; Nlim:8,500 rpm; |
| Bearing 32968 | L:95 mm; G:R1/8"; B:27 mm; Designation of closed end cover:SCC205; Weight:0.8 kg; e:19 mm; A2:38.5 mm; A:30 mm; N:11,5mm; Z:42.4 mm; |
| Bearing 32956 | Retainer Type:Punching; Accuracy(Class):Class 0; Bearing Ring Type:Type NJ; Load Direction:Radial; Width(mm):46; RoHS:6; Outer Ring Type:Flat; O.D.(Ø):180; Rolling Element Material:Steel; Internal Symbol:No; |
| Bearing 32236 | S:22.2 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; B:55.6 mm; Weight:1.1 kg; T min.:-20 °C; A2:33.4 mm; d:55.56 mm; T max.:200 °C; Designation of bearing:UC211-35G2T20; |
| Bearing 30348 | L:95 mm; G:R1/8"; B:27 mm; Designation of closed end cover:SCC205; Weight:0.8 kg; e:19 mm; A2:38.5 mm; A:30 mm; N:11,5mm; Z:42.4 mm; |
| Bearing 30321 | Static load, C0:16.6 kN; Radial clearance class:CN; Brand:NTN; Characteristic inner ring frequency, BPFI:7.94 Hz; Nlim (grease):8,400 rpm; rs min:1 mm; da min:55 mm; Min operating temperature, Tmin:-25 °C; Characteristic cage frequency, FTF:0.43 Hz; ra max:1 mm; |
| Bearing 32028X | Characteristic inner ring frequency, BPFI:8.89 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:52.6 kN; rs min:3 mm; e:0.32; Da max:166 mm; Y2:3.11; Characteristic rolling element frequency, BSF:5.1 Hz; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.41 Hz; |
| Bearing 32034X | Retainer Type:Punching; Accuracy(Class):Class 0; Bearing Ring Type:Type NJ; Load Direction:Radial; Width(mm):46; RoHS:6; Outer Ring Type:Flat; O.D.(Ø):180; Rolling Element Material:Steel; Internal Symbol:No; |
| Bearing 30321 | Characteristic inner ring frequency, BPFI:8.89 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:52.6 kN; rs min:3 mm; e:0.32; Da max:166 mm; Y2:3.11; Characteristic rolling element frequency, BSF:5.1 Hz; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.41 Hz; |
| Bearing 32248 | Basic Load Rating Cr (Dynamic)(kN):5.68; Material:[Stainless Steel] 44; d:8; RoHS:6; Days to Ship:6 Days; Roller Type:Crowned Type; Roller Lining:None; Volume Discount:Available; Roller Follower Type:Non-Separate; Unit:Metric Series; |
Single Row Tapered Roller Bearings | Single Row TRB - NBC
The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in
Tapered Roller Bearings | Fersa Bearings
Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers
Double row tapered roller bearings
SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and
Tapered roller bearings by FAG | Schaeffler Germany
FAG tapered roller bearings can support high radial and axial loads with X-Life Quality ➤ Inform now. ... Single-row tapered roller bearings. Single-row tapered
SKF Single row tapered roller bearing metric | ERIKS shop NL
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are
Single row tapered roller bearings
This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved