| Bearing 30321 | Characteristic inner ring frequency, BPFI:8.89 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:52.6 kN; rs min:3 mm; e:0.32; Da max:166 mm; Y2:3.11; Characteristic rolling element frequency, BSF:5.1 Hz; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.41 Hz; |
| Bearing 32922 | Static load, C0:20.2 kN; rs min:2 mm; d1:65.8 mm; Min operating temperature, Tmin:-20 °C; Brand:SNR; D1:92.9 mm; Da max:101 mm; Characteristic outer ring frequency, BPF0:4.72 Hz; ra max:2 mm; Nlim:8,500 rpm; |
| Bearing 30228 | s1:39.7 mm; A1:13 mm; S:21.4 mm; C0:20.8 kN; B:42.8 mm; e:24 mm; G:R1/8"; T min.:-20 °C; C:31.85 kN; Designation of bearing:EX209-28G2L4; |
| Bearing 32240 | L:95 mm; G:R1/8"; B:27 mm; Designation of closed end cover:SCC205; Weight:0.8 kg; e:19 mm; A2:38.5 mm; A:30 mm; N:11,5mm; Z:42.4 mm; |
| Bearing 30221 | L:95 mm; G:R1/8"; B:27 mm; Designation of closed end cover:SCC205; Weight:0.8 kg; e:19 mm; A2:38.5 mm; A:30 mm; N:11,5mm; Z:42.4 mm; |
| Bearing 32248 | Basic Load Rating Cr (Dynamic)(kN):5.68; Material:[Stainless Steel] 44; d:8; RoHS:6; Days to Ship:6 Days; Roller Type:Crowned Type; Roller Lining:None; Volume Discount:Available; Roller Follower Type:Non-Separate; Unit:Metric Series; |
| Bearing 32248 | Width T(mm):35; Flange Shape:Round Type; Flange O.D. H(φ):47; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; |
| Bearing 31328 | Type:Ball; Allowable Rotational Speed(rpm):900; Number of Raceway Ring Rows:Single Track; Load Direction:Radial; Volume Discount:Available; Outer Ring Shape:Standard; Size Standards:Metric Series; d:6; Bearing Style:Double Shielded; |
| Bearing 32056X | s1:39.7 mm; A1:13 mm; S:21.4 mm; C0:20.8 kN; B:42.8 mm; e:24 mm; G:R1/8"; T min.:-20 °C; C:31.85 kN; Designation of bearing:EX209-28G2L4; |
| Bearing 32338 | Characteristic inner ring frequency, BPFI:8.89 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:52.6 kN; rs min:3 mm; e:0.32; Da max:166 mm; Y2:3.11; Characteristic rolling element frequency, BSF:5.1 Hz; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.41 Hz; |
| Bearing 32230 | Static load, C0:20.2 kN; rs min:2 mm; d1:65.8 mm; Min operating temperature, Tmin:-20 °C; Brand:SNR; D1:92.9 mm; Da max:101 mm; Characteristic outer ring frequency, BPF0:4.72 Hz; ra max:2 mm; Nlim:8,500 rpm; |
| Bearing 32072X | s1:39.7 mm; A1:13 mm; S:21.4 mm; C0:20.8 kN; B:42.8 mm; e:24 mm; G:R1/8"; T min.:-20 °C; C:31.85 kN; Designation of bearing:EX209-28G2L4; |
| Bearing 30344 | Static load, C0:20.2 kN; rs min:2 mm; d1:65.8 mm; Min operating temperature, Tmin:-20 °C; Brand:SNR; D1:92.9 mm; Da max:101 mm; Characteristic outer ring frequency, BPF0:4.72 Hz; ra max:2 mm; Nlim:8,500 rpm; |
| Bearing 30340 | C0:29.2 kN; s1:22.65 mm; N1:26 mm; A:60 mm; J:170.5 mm; Designation of open end cover:SCO211-55; Z:78.9 mm; Dz:110 mm; C:43.55 kN; Weight:3.62 kg; |
Tapered Roller Bearings | Fersa Bearings
Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers
Single Row Tapered Roller Bearings | Single Row TRB - NBC
The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only
Single row tapered roller bearings
This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved
Tapered roller bearings by FAG | Schaeffler Germany
FAG tapered roller bearings can support high radial and axial loads with X-Life Quality ➤ Inform now. ... Single-row tapered roller bearings. Single-row tapered
SKF Single row tapered roller bearing metric | ERIKS shop NL
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in
Double row tapered roller bearings
SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and