Bearing 250KV3601	S:12.7 mm; T min.:-20 °C; L:264 mm; H:78 mm; Dz:54 mm; A:21 mm; T max.:200 °C; G:R1/8"; A5:18.3 mm; Recommended tightening torque for set screw:5.5 Nm;
Bearing 340KV80	Volume Discount:Available; Flange Shape:Square Type; Flange O.D. H(φ):54; Shape:Flange Type; Width T(mm):14; Holder Surface Treatment:Not Provided; Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Type:Bearings with Housin;
Bearing 320KV81	H1:20 mm; Designation of housing:PG207N-; S:17.5 mm; G:M6x1; C0:15.2 kN; B:42.9 mm; L:100 mm; Designation of bearing:UC207G2T04; Recommended tightening torque for set screw:11.5 Nm; E:22 mm;
Bearing 501KV6751	S:12.7 mm; T min.:-20 °C; L:264 mm; H:78 mm; Dz:54 mm; A:21 mm; T max.:200 °C; G:R1/8"; A5:18.3 mm; Recommended tightening torque for set screw:5.5 Nm;
Bearing 280KV3801	Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Shape:T-Shaped; Width T(mm):12; Seals:ZZ (Double Shield); Days to Ship:8 Days; Height H(mm):30 ～ 50; Bearing Retained:Yes (with retaining;
Bearing 500KV895	H2:83 mm; H:117 mm; T min.:-20 °C; C0:23.2 kN; Z:23 mm; A:49 mm; s1:25.8 mm; A1:16 mm; L2:16 mm; d:50 mm;
Bearing 250KV3602	H2:83 mm; H:117 mm; T min.:-20 °C; C0:23.2 kN; Z:23 mm; A:49 mm; s1:25.8 mm; A1:16 mm; L2:16 mm; d:50 mm;
Bearing 355KV4853	H1:20 mm; Designation of housing:PG207N-; S:17.5 mm; G:M6x1; C0:15.2 kN; B:42.9 mm; L:100 mm; Designation of bearing:UC207G2T04; Recommended tightening torque for set screw:11.5 Nm; E:22 mm;
Bearing 368KV5951	Rating life coefficient, A2:1.9; Characteristic cage frequency, FTF:0.43 Hz; ra max:3.5 mm; Characteristic outer ring frequency, BPF0:7.71 Hz; T:23.81 mm; Brand:NTN; Nlim (grease):4,800 rpm; Static load, C0:97.5 kN; Dynamic load, C:76.5 kN; Characteristic rolling element frequency, BSF:6.7 Hz;
Bearing EE127097D-135-136D	Cup Part Number:2320; Db - Cup Backface Backing Diameter:46.99 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3710 lbf; B:23.818 mm; Aa - Cage-Cone Backface Clearance:-0.8 mm; G1 - Heat Generation Factor (Roller-Raceway):13.8; G2 - Heat Generation Factor (Rib-Roller End):5.9; d:25.400 mm; Cg - Geometry Factor:0.0517; e - ISO Factor8:0.23;
Bearing M252349D-310-310D	e:44 mm; G:M10x1; C0:96.5 kN; A2:111.5 mm; T min.:-20 °C; d1:127 mm; B1:109.5 mm; N:31mm; T max.:100 °C; Designation of bearing:EX317-52G2L3;
Bearing 708KV9351	Retainer Type:Punching; Rolling Element Material:Steel; Bearing Style:Open Type; Max. Allowed rpm(rpm):4300; D:130; Outer Ring Shape:Spherical Surface; Type:Self-aligning ball; Inner/Outer Ring Material:Steel;
Bearing LM274449DW-410-410D	Material:[Carbon Steel] Carbo; RoHS:6; Category:Roller Follower; Basic Load Rating, Dynamic Rating(kN):39; Roller Follower Type:Non-Separable Type; Shaft:No; d:35; Inner Ring:Presence; Basic Load Rating, Static Rating(kN):77; Days to Ship:9 Days;
Bearing 380KV80	Retainer Type:Punching; Rolling Element Material:Steel; Bearing Style:Open Type; Max. Allowed rpm(rpm):4300; D:130; Outer Ring Shape:Spherical Surface; Type:Self-aligning ball; Inner/Outer Ring Material:Steel;