| 795/792 | a:15 mm; e:0.38; Y2:1.58; Characteristic rolling element frequency, BSF:7.77 Hz; r1s min:1 mm; Cb min:4.5 mm; C:14.5 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:8 kN; Rating life coefficient, A2:1.4; |
| HH926744/HH926716 | Flange Shape:Round Type; Type:Angular Contact Bear; Number of Bearings:Double; Bearing Used:Angular Contact Bear; Flange O.D. H(φ):147; Cover Type Selection:S (for Oil Seal); Bearing I.D. d(mm):50; Bearing Part Number:7010; |
| M246942/M246910 | L1:70 mm; A2:28 mm; L2:10 mm; Z:70.7 mm; H1:89 mm; Designation of bearing:ES206G2T20; A:37 mm; B:23.8 mm; C0:11.2 kN; N:22mm; |
| EE161363/161850 | H:42.9 mm; T min.:-20 °C; L:98 mm; J:76.2 mm; B1:35.7 mm; G:R1/8"; s1:27.8 mm; d:30 mm; Recommended tightening torque for set screw:11.5 Nm; C:19.5 kN; |
| EE130787/131400 | a:15 mm; e:0.38; Y2:1.58; Characteristic rolling element frequency, BSF:7.77 Hz; r1s min:1 mm; Cb min:4.5 mm; C:14.5 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:8 kN; Rating life coefficient, A2:1.4; |
| EE333140/333197 | L1:70 mm; A2:28 mm; L2:10 mm; Z:70.7 mm; H1:89 mm; Designation of bearing:ES206G2T20; A:37 mm; B:23.8 mm; C0:11.2 kN; N:22mm; |
| HR32028XJ | Flange Shape:Round Type; Type:Angular Contact Bear; Number of Bearings:Double; Bearing Used:Angular Contact Bear; Flange O.D. H(φ):147; Cover Type Selection:S (for Oil Seal); Bearing I.D. d(mm):50; Bearing Part Number:7010; |
| L570649/L570610 | Rolling Element Material:Steel; Retainer Type:Punching; Inner/Outer Ring Material:Steel; Load Direction:Radial; Specifications/Environment:Standard; Days to Ship:6 Days; Number of Raceway Ring Rows:Single Row; Type:Ball; Size Standards:Metric System; Basic Dynamic Load Rating(N):7900; |
| EE551026/551662 | Shape:Flange Type; Seals:ZZ (Double Shield); Volume Discount:Available; RoHS:6; Flange Shape:Round Type; Holder Width(inch):1-1/4; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; |
| HR32044XJ | Rolling Element Material:Steel; Retainer Type:Punching; Inner/Outer Ring Material:Steel; Load Direction:Radial; Specifications/Environment:Standard; Days to Ship:6 Days; Number of Raceway Ring Rows:Single Row; Type:Ball; Size Standards:Metric System; Basic Dynamic Load Rating(N):7900; |
| HR32034XJ | Grease Lubrication - M/N Seal:900 rpm; Engineering Group:Mounted Bearing; Dimension RV:0.39 in; Oil Lubrication - M/N Seal:900 rpm; e - Geometry Factor:0.25; Dimension C:5.5 in; Shaft Size Type:Metric; C0 - Static Load:147000 lb; Dimension L:4.94 in; Dimension B:9.38 in; |
| EE114080/114160 | Type:Bearings with Housin; Bearing Material:[Steel] Steel; RoHS:6; Bearing I.D. d(mm):5; Bearing Part Number:605; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Housing Material:1045 Carbon Steel; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; |
| EE125094/125145 | C0 - Static Load:26600 lb; Dimension F:1.06 in; Float:0.050 in; Housing Style:Take-Up; Shaft Size Type:Metric; Oil Lubrication - M/N Seal:2400 rpm; Pre Install Clearance Min:0.040 mm; Dimension N:3.02 in; Oil Lubrication - T Seal:4200 rpm; Dimension D:4.75 in; |
| 95491/95925 | Flange Shape:Round Type; Type:Angular Contact Bear; Number of Bearings:Double; Bearing Used:Angular Contact Bear; Flange O.D. H(φ):147; Cover Type Selection:S (for Oil Seal); Bearing I.D. d(mm):50; Bearing Part Number:7010; |