| CRT1209V | Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:No Cover; Surface Treatment:No; Seal:Nitrile; d:60; Stroke:No; Unit Body Material:Cast Iron; Fit:J7; |
| LH-WA22215BLLS | SW:3.97 mm; S:9 mm; C1:5 mm; T max.:100 °C; B2:15.9 mm; Weight:0.35 kg; r:0.6; B1:35.7 mm; B:23.8 mm; C:16 mm; |
| W6415 | Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Seals:DD (Contact Rubber S; Lateral Width L(mm):38; Bearing Part Number:608; Number of Bearings:Single; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; |
| R08A02V | Basic Load Rating, Dynamic Rating(N):62200; Bearing Unit, Type:Round flange shape; Fit:J7; RoHS:6; Grease Type:Standard Grease; Unit Body Material:Cast Iron; Seal:Nitrile; Unit, Type:Insert Bearing Unit; Stroke:No; |
| CU10B01W | Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:No Cover; Surface Treatment:No; Seal:Nitrile; d:60; Stroke:No; Unit Body Material:Cast Iron; Fit:J7; |
| CRT1007V | Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:No Cover; Surface Treatment:No; Seal:Nitrile; d:60; Stroke:No; Unit Body Material:Cast Iron; Fit:J7; |
| 2PE4002 | f0:14; Radial clearance class:C4; da max:50.3 mm; d:40 mm; B:18 mm; Dynamic load, C:28.7 kN; d1:50.3 mm; Static load, C0:17.9 kN; Characteristic cage frequency, FTF:0.4 Hz; Characteristic outer ring frequency, BPF0:3.61 Hz; |
| LH-WA22212BLLSK | Oil Lubrication - B/C/O Seal:600 rpm; Dimension F:16.00 in; Shaft Size Type:Imperial; Grease Lubrication - M/N Seal:900 rpm; Eng Internal Radial Clearance - Max:0.0067; Full Timken Part Number:QVVPN22V400SB; Dimension D Min:12.50 in; Dimension RVV:0.59 in; Engineering Group:Mounted Bearing; Y2 - Geometry Factor:4.06; |
| 2PE10101 | Days to Ship:6 Days or more; Acoustic Symbol:No; Specifications/Environment:Standard; Material Symbol:No; Inner/Outer Ring Material:[Steel] Steel; Seal, Shield Symbols:Z; Low Torque Specification:No; Size Standards:Metric System; Spacer, Sleeve symbol:No; |
| RE4206 | Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:No Cover; Surface Treatment:No; Seal:Nitrile; d:60; Stroke:No; Unit Body Material:Cast Iron; Fit:J7; |
| R1564V | Shaft Dia. (mm)(φ):22; G(mm):M22×1.5; H1(mm):84; Unit, Type:Joint Ball; C1(mm):20; Days to Ship:Quote; B(mm):28; |
| RE4703 | Shaft Dia. (mm)(φ):22; G(mm):M22×1.5; H1(mm):84; Unit, Type:Joint Ball; C1(mm):20; Days to Ship:Quote; B(mm):28; |
| 2PE3801 | D4 max:32.8 mm; da max:20 mm; Ca min:2 mm; D:30 mm; Nlim (grease):14,000 rpm; B:7 mm; Mass:0.02 kg; Max operating temperature, Tmax:110 °C; Characteristic outer ring frequency, BPF0:4.56 Hz; Characteristic inner ring frequency, BPFI:6.44 Hz; |
| CRT1105V | Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:No Cover; Surface Treatment:No; Seal:Nitrile; d:60; Stroke:No; Unit Body Material:Cast Iron; Fit:J7; |