2RT8502	C:24.9 kN; J:127 mm; H:95 mm; H1:19 mm; Z:58.4 mm; G:M6x1; Dz:80 mm; Adapter sleeve reference:HLK2307; Designation of housing:PH207N-; L1:56 mm;
CRTD3618	Bearing Part Number:6003; Bearing I.D. d(mm):17; Shape:T-Shaped; Width T(mm):16; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):70; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Height H(mm):25 ～ 50; C Chamfered:Not Provided;
51280	T max.:200 °C; T min.:-20 °C; e:24 mm; H:190 mm; C0:23.2 kN; B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; J:157 mm; S:11 mm; Weight:2.1 kg;
29234	Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;
29240	Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;
81228L1	Characteristic rolling element frequency, BSF:5.3 Hz; f0:14.4; D1:101.3 mm; D:110 mm; Max operating temperature, Tmax:350 °C; Mass:0.78 kg; Radial clearance class:> C5; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:0 kN; Da max:102 mm;
292/630	Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;
87424L1	L:222 mm; G:R1/8"; H2:124.5 mm; B:55.6 mm; N:18mm; H:63.5 mm; T min.:-20 °C; A1:35 mm; A:60 mm; Dz:110 mm;
29388	Bearing Part Number:6003; Bearing I.D. d(mm):17; Shape:T-Shaped; Width T(mm):16; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):70; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Height H(mm):25 ～ 50; C Chamfered:Not Provided;
51288	Flange O.D. H(φ):47; Days to Ship:8 Days; Shape:Flanged Pilot Type; Width T(mm):25 ～ 35; Bearing Material:[Steel] Steel; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Flange Shape:Round Type;
29392	L:222 mm; G:R1/8"; H2:124.5 mm; B:55.6 mm; N:18mm; H:63.5 mm; T min.:-20 °C; A1:35 mm; A:60 mm; Dz:110 mm;
CRTD6406	L:222 mm; G:R1/8"; H2:124.5 mm; B:55.6 mm; N:18mm; H:63.5 mm; T min.:-20 °C; A1:35 mm; A:60 mm; Dz:110 mm;
51168	Inside Ring Outside Diameter:2.280 in; Total Height:136.5 mm; Bolt Size:M12; Dimension E:2.186 in; Dimension D:4.126 in; Shaft Size d:1 11/16 in; Seal Type:Shroud Seal; Series:Industrial; Static Load Rating:4600 lbf; Center of Bearing from Housing End A2:24.12 mm;
511/750	Characteristic rolling element frequency, BSF:5.3 Hz; f0:14.4; D1:101.3 mm; D:110 mm; Max operating temperature, Tmax:350 °C; Mass:0.78 kg; Radial clearance class:> C5; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:0 kN; Da max:102 mm;