29230	Characteristic rolling element frequency, BSF:5.3 Hz; f0:14.4; D1:101.3 mm; D:110 mm; Max operating temperature, Tmax:350 °C; Mass:0.78 kg; Radial clearance class:> C5; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:0 kN; Da max:102 mm;
3RT5404	Seals:VV (Non-Contact Rubb; Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Type:Bearings with Housin; Bearing Retained:No; Flange O.D. H(φ):52; Bearing Used:Deep Groove Ball Bea;
29380	Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;
51252	C:24.9 kN; J:127 mm; H:95 mm; H1:19 mm; Z:58.4 mm; G:M6x1; Dz:80 mm; Adapter sleeve reference:HLK2307; Designation of housing:PH207N-; L1:56 mm;
294/560	Weight:1.17 kg; Designation of housing:FL207N-; s1:16 mm; C0:15.2 kN; A1:14 mm; A:34 mm; B:32 mm; H:161 mm; S:8.5 mm; L:90 mm;
CRT3409	Weight:1.17 kg; Designation of housing:FL207N-; s1:16 mm; C0:15.2 kN; A1:14 mm; A:34 mm; B:32 mm; H:161 mm; S:8.5 mm; L:90 mm;
81132L1	Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm;
51122	Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm;
CRTD3618	Bearing Part Number:6003; Bearing I.D. d(mm):17; Shape:T-Shaped; Width T(mm):16; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):70; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Height H(mm):25 ～ 50; C Chamfered:Not Provided;
CRTD9408	r - Cup Frontface To Clear Radius2:0.04 in; e - ISO Factor4:0.37; Da - Cup Frontface Backing Diameter:10.31 in; Design Units:Imperial; D:10.8780 in; Series:H432600; Y1 - ISO Factor5:1.8; C - Double Cup Width:7.0000 in; Cg - Geometry Factor7:0.114; K - Factor3:1.56;
511/750	Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm;
CRT2223	Days to Ship:Quote; Temperature Properties:For Heat Resistant; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Take-Up Type; Unit, Type:Bearing unit; Surface Treatment:No; Basic Load Rating, Static Rating(N):20400; d:45;
29326	C:24.9 kN; J:127 mm; H:95 mm; H1:19 mm; Z:58.4 mm; G:M6x1; Dz:80 mm; Adapter sleeve reference:HLK2307; Designation of housing:PH207N-; L1:56 mm;
29380	T max.:200 °C; T min.:-20 °C; e:24 mm; H:190 mm; C0:23.2 kN; B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; J:157 mm; S:11 mm; Weight:2.1 kg;