29456	Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm;
CRTD6104	Dimension D:7.63 in; Shaft Size  :3-3/16 in; Dimension C:4.900 in; Grease Lubrication - T Seal:1800 rpm; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.80; Bearing Number:22219; Dimension H:1.13 in; Dimension L Exp:4.57 in; Float:0.083 in;
29468	Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm;
51334	r - Cup Frontface To Clear Radius2:0.04 in; e - ISO Factor4:0.37; Da - Cup Frontface Backing Diameter:10.31 in; Design Units:Imperial; D:10.8780 in; Series:H432600; Y1 - ISO Factor5:1.8; C - Double Cup Width:7.0000 in; Cg - Geometry Factor7:0.114; K - Factor3:1.56;
CRTD9408	r - Cup Frontface To Clear Radius2:0.04 in; e - ISO Factor4:0.37; Da - Cup Frontface Backing Diameter:10.31 in; Design Units:Imperial; D:10.8780 in; Series:H432600; Y1 - ISO Factor5:1.8; C - Double Cup Width:7.0000 in; Cg - Geometry Factor7:0.114; K - Factor3:1.56;
89326L1	C:24.9 kN; J:127 mm; H:95 mm; H1:19 mm; Z:58.4 mm; G:M6x1; Dz:80 mm; Adapter sleeve reference:HLK2307; Designation of housing:PH207N-; L1:56 mm;
29380	Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;
51184	T max.:200 °C; T min.:-20 °C; e:24 mm; H:190 mm; C0:23.2 kN; B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; J:157 mm; S:11 mm; Weight:2.1 kg;
81126L1	Inside Ring Outside Diameter:2.280 in; Total Height:136.5 mm; Bolt Size:M12; Dimension E:2.186 in; Dimension D:4.126 in; Shaft Size d:1 11/16 in; Seal Type:Shroud Seal; Series:Industrial; Static Load Rating:4600 lbf; Center of Bearing from Housing End A2:24.12 mm;
81220L1	Bearing Part Number:6003; Bearing I.D. d(mm):17; Shape:T-Shaped; Width T(mm):16; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):70; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Height H(mm):25 ～ 50; C Chamfered:Not Provided;
29296	Flange O.D. H(φ):47; Days to Ship:8 Days; Shape:Flanged Pilot Type; Width T(mm):25 ～ 35; Bearing Material:[Steel] Steel; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Flange Shape:Round Type;
29448	Inside Ring Outside Diameter:2.280 in; Total Height:136.5 mm; Bolt Size:M12; Dimension E:2.186 in; Dimension D:4.126 in; Shaft Size d:1 11/16 in; Seal Type:Shroud Seal; Series:Industrial; Static Load Rating:4600 lbf; Center of Bearing from Housing End A2:24.12 mm;
51132	T max.:200 °C; T min.:-20 °C; e:24 mm; H:190 mm; C0:23.2 kN; B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; J:157 mm; S:11 mm; Weight:2.1 kg;
81230L1	Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm;