| 2RT4427 | Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape; |
| 51328 | Bearing Part Number:6003; Bearing I.D. d(mm):17; Shape:T-Shaped; Width T(mm):16; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):70; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Height H(mm):25 ～ 50; C Chamfered:Not Provided; |
| 29276 | Flange O.D. H(φ):47; Days to Ship:8 Days; Shape:Flanged Pilot Type; Width T(mm):25 ～ 35; Bearing Material:[Steel] Steel; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Flange Shape:Round Type; |
| 29264 | Flange O.D. H(φ):47; Days to Ship:8 Days; Shape:Flanged Pilot Type; Width T(mm):25 ～ 35; Bearing Material:[Steel] Steel; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Flange Shape:Round Type; |
| 51288 | Dimension D:7.63 in; Shaft Size :3-3/16 in; Dimension C:4.900 in; Grease Lubrication - T Seal:1800 rpm; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.80; Bearing Number:22219; Dimension H:1.13 in; Dimension L Exp:4.57 in; Float:0.083 in; |
| 29392 | Days to Ship:Quote; Temperature Properties:For Heat Resistant; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Take-Up Type; Unit, Type:Bearing unit; Surface Treatment:No; Basic Load Rating, Static Rating(N):20400; d:45; |
| 29260 | r - Cup Frontface To Clear Radius2:0.04 in; e - ISO Factor4:0.37; Da - Cup Frontface Backing Diameter:10.31 in; Design Units:Imperial; D:10.8780 in; Series:H432600; Y1 - ISO Factor5:1.8; C - Double Cup Width:7.0000 in; Cg - Geometry Factor7:0.114; K - Factor3:1.56; |
| 51156 | Adapter sleeve reference:H2307; A1:27 mm; Designation of closed end cover:SCC207; s1:22.5 mm; G:M6x1; Designation of bearing:UK207G2H; A:48 mm; Designation of housing:PG207N-; J:68 mm; Z:59.9 mm; |
| 51330 | Seals:VV (Non-Contact Rubb; Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Type:Bearings with Housin; Bearing Retained:No; Flange O.D. H(φ):52; Bearing Used:Deep Groove Ball Bea; |
| 51252 | C:24.9 kN; J:127 mm; H:95 mm; H1:19 mm; Z:58.4 mm; G:M6x1; Dz:80 mm; Adapter sleeve reference:HLK2307; Designation of housing:PH207N-; L1:56 mm; |
| 51288 | C:24.9 kN; J:127 mm; H:95 mm; H1:19 mm; Z:58.4 mm; G:M6x1; Dz:80 mm; Adapter sleeve reference:HLK2307; Designation of housing:PH207N-; L1:56 mm; |
| 29380 | T max.:200 °C; T min.:-20 °C; e:24 mm; H:190 mm; C0:23.2 kN; B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; J:157 mm; S:11 mm; Weight:2.1 kg; |
| 29438 | Characteristic rolling element frequency, BSF:5.3 Hz; f0:14.4; D1:101.3 mm; D:110 mm; Max operating temperature, Tmax:350 °C; Mass:0.78 kg; Radial clearance class:> C5; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:0 kN; Da max:102 mm; |
| 87420L1 | T max.:200 °C; T min.:-20 °C; e:24 mm; H:190 mm; C0:23.2 kN; B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; J:157 mm; S:11 mm; Weight:2.1 kg; |