625938	f0:8.42; Brand:SNR; d1:46.8 mm; Fatigue limit load, Cu:0.29 kN; Preload level:8; Mass:0.11 kg; D1:55.91 mm; Min operating temperature, Tmin:-20 °C; d:40 mm; db min:44.5 mm;
81576D/81962/81963D	C:19.5 kN; s1:15 mm; G:R1/8"; Z:18.5 mm; L:98 mm; S:8 mm; B:30 mm; J:76.2 mm; T min.:-40 °C; T max.:100 °C;
CRO-11216	N:11,5mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FE204-; J:63.5 mm; d:17.46 mm; A2:37.3 mm; A:29.5 mm; C:12.8 kN; S:12.7 mm;
M284148D/M284111/M284110DG2	C:19.5 kN; s1:15 mm; G:R1/8"; Z:18.5 mm; L:98 mm; S:8 mm; B:30 mm; J:76.2 mm; T min.:-40 °C; T max.:100 °C;
CRO-14209LL	Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Accessory:No Cover; Days to Ship:8 Days; Bearing Unit, Type:Square flange shape; Fit:J7; Stroke:No;
CRO-4014	Surface Treatment:No; Seal:Nitrile; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; d:45; Basic Load Rating, Dynamic Rating(N):35100; Pillow Type, Category:Thick Wall; Grease Type:Standard Grease; B:70;
CRO-12604	e:29 mm; A:48 mm; A1:18 mm; J:202 mm; d:57.15 mm; Dz:120 mm; Designation of bearing:UC212-36G2L3; C0:32.8 kN; A2:68.7 mm; T max.:100 °C;
CRO-14209LL	N:11,5mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FE204-; J:63.5 mm; d:17.46 mm; A2:37.3 mm; A:29.5 mm; C:12.8 kN; S:12.7 mm;
HM265049D/HM265010/HM265010DG2	Cage Type:Stamped Steel; C - Cup Width:15.000 mm; db - Cone Backface Backing Diameter:56.90 mm; C0 - Static Radial Rating:77900 N; Bearing Weight:0.4 Kg; Ab - Cage-Cone Frontface Clearance:0 mm; Cg - Geometry Factor:0.0785; Cup Part Number:KJLM603013-ZK; R - Cone Backface To Clear Radius1:3.560 mm; Y - ISO Factor9:1.41;
LM258649D/LM258610/LM258610D	f0:8.42; Brand:SNR; d1:46.8 mm; Fatigue limit load, Cu:0.29 kN; Preload level:8; Mass:0.11 kg; D1:55.91 mm; Min operating temperature, Tmin:-20 °C; d:40 mm; db min:44.5 mm;
CRO-6944	f0:8.42; Brand:SNR; d1:46.8 mm; Fatigue limit load, Cu:0.29 kN; Preload level:8; Mass:0.11 kg; D1:55.91 mm; Min operating temperature, Tmin:-20 °C; d:40 mm; db min:44.5 mm;
CRO-6022	Roller Lining:None; D:8; Unit:Metric Series; Roller Type:Flat Type; Basic Load Rating Cr (Dynamic)(kN):1080; Shaft:Provided; Tightening Method:Hex Socket on Head; Category:Cam Followers; Allowable Rotational Speed(rpm):2100;
CRO-6022	C:19.5 kN; s1:15 mm; G:R1/8"; Z:18.5 mm; L:98 mm; S:8 mm; B:30 mm; J:76.2 mm; T min.:-40 °C; T max.:100 °C;
LM778549D/LM778510/LM778510DG2	r - Cup Backface To Clear Radius2:3.30 mm; Bearing Weight:17.2 Kg; Cg - Geometry Factor:0.146; e - ISO Factor8:0.52; G2 - Heat Generation Factor (Rib-Roller End):126.1; Cone Part Number:93812; db - Cone Backface Backing Diameter:230.12 mm; d:206.375 mm; Aa - Cage-Cone Backface Clearance:8.1 mm; Ab - Cage-Cone Frontface Clearance:5.3 mm;