| LL771948/LL771911 | Precision Class:ISO P4S (ABEC 7/9); D:80 mm; R - Inner Ring To Clear Radius2:1.0 mm; C0 - Static Radial Rating:9430 N; Da - Outer Ring Backing Diameter:75.200 mm; Design Units:METRIC; Limiting Speed (Grease):20700 rpm; d:55 mm; Ball Type:STEEL; Limiting Speed (Oil):41400 rpm; |
| LL788345/LL788310 | O.D.(Ø):42; Type:Ball; Torque Symbol:No; Types:No; Clearance sign:C3; Symbol of Bearing Ring Shape:No; Low Torque Specification:No; Outer Ring:With Outer Ring; Material Symbol:No; |
| 32080 | O.D.(Ø):42; Type:Ball; Torque Symbol:No; Types:No; Clearance sign:C3; Symbol of Bearing Ring Shape:No; Low Torque Specification:No; Outer Ring:With Outer Ring; Material Symbol:No; |
| T-M272749/M272710G2 | Characteristic outer ring frequency, BPF0:4.12 Hz; Nlim (oil):18,000 rpm; D:47 mm; Static load, C0:5.85 kN; Fatigue limit load, Cu:0.27 kN; Max operating temperature, Tmax:120 °C; ra max:0.6 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.88 Hz; d:25 mm; |
| EE526130/526190 | Holder Surface Treatment:Electroless Nickel P; Lateral Width L(mm):96; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Width T(mm):19; Bearing I.D. d(mm):25; Height H(mm):40; C Chamfered:Not Provided; |
| LM665949/LM665910 | C:11 kN; H:125 mm; Recommended tightening torque for set screw:3.9 Nm; Designation of bearing:SUC205-16; T max.:100 °C; S:14.3 mm; Weight:0.6 kg; d:25.4 mm; e:16 mm; B:34.1 mm; |
| T-M252337/M252310 | d:65; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Surface Treatment:No; Unit Body Material:Cast Iron; Cover Type:Cast iron closing co; Unit, Type:Bearing unit; Days to Ship:9 Days; Basic Dynamic Load Rating Cr(N):92500; |
| EE430900/431575 | O.D.(Ø):42; Type:Ball; Torque Symbol:No; Types:No; Clearance sign:C3; Symbol of Bearing Ring Shape:No; Low Torque Specification:No; Outer Ring:With Outer Ring; Material Symbol:No; |
| HM746646/HM746610 | Holder Surface Treatment:Electroless Nickel P; Lateral Width L(mm):96; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Width T(mm):19; Bearing I.D. d(mm):25; Height H(mm):40; C Chamfered:Not Provided; |
| T-H936340/H936310 | Dimension H:3.1 in; Dimension T:13.0 in; Dimension L:5.8 in; Series Type:Medium Series; Bearing UPC:013992035141; Cr - Dynamic Load Rating:58001 lbf; Dimension N:8.5 in; Support Type:Round Flange; Bearing - Housing - Seal:MSM70BRHRSS; Dimension P:0.7 in; |
| EE755280/755360G2 | Precision Class:ISO P4S (ABEC 7/9); D:80 mm; R - Inner Ring To Clear Radius2:1.0 mm; C0 - Static Radial Rating:9430 N; Da - Outer Ring Backing Diameter:75.200 mm; Design Units:METRIC; Limiting Speed (Grease):20700 rpm; d:55 mm; Ball Type:STEEL; Limiting Speed (Oil):41400 rpm; |
| M278749/M278710AG2 | Number of Bearings:Double; Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Retained:No; Flange O.D. H(φ):47; Bearing Material:Stainless Steel; Volume Discount:Available; |
| EE526130/526190 | Designation of open end cover:SCOE210-50; S:11 mm; s1:33.4 mm; d1:67.2 mm; Weight:2.61 kg; Recommended tightening torque for set screw:11.5 Nm; C0:23.2 kN; A1:32 mm; C:35.1 kN; A:60 mm; |
| T-LM451349/LM451310 | Holder Surface Treatment:Electroless Nickel P; Lateral Width L(mm):96; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Width T(mm):19; Bearing I.D. d(mm):25; Height H(mm):40; C Chamfered:Not Provided; |
Tapered Roller Bearings - NTN Global
Tapered roller bearings are designed so the tapered vertex of the raceway surfaces of the inner and outer rings and rollers converge at one point on the centerline of the bearing. ... A large variety of these bearings, including single, double, and four row arrangements, are in use both in metric and inch series
Single row tapered roller bearings Industry Solutions : NTN
The single row tapered roller bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, metric series
LARGE BEARINGS Tapered Roller bearings - NTN Global
Table 1 Structure and characteristics of double row tapered roller bearings. Fig.1. Fig.2. E. 2α. Sub-unit dimensions. E : Cup small inside diameter, nominal
Double Row Tapered Roller Bearings - NTN Bearing Finder
Browse Double Row Tapered Roller Bearings in the NTN Bearing Corp. of America catalog including Item #,d,D,C,B1,r,Static Load Rating,Dynamic Load Rating
Tapered Roller Bearings - NTN Global
A large variety of these bearings, including single, double, and four row arrangements, are in use both in metric and inch series. B-119. Type. Characteristics
Double-row tapered roller bearings - NTN Global
oil. 1）Minimum allowable dimension for chamfer dimension r or r1. φD. C φd a. B1 r r1. ○ Double Row Tapered Roller Bearings. Back-to-back arrangement
Single row tapered roller bearings Industry Solutions : NTN
The single row tapered roller bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, metric series