| T-HH231649/HH231610 | Precision Class:ISO P4S (ABEC 7/9); D:80 mm; R - Inner Ring To Clear Radius2:1.0 mm; C0 - Static Radial Rating:9430 N; Da - Outer Ring Backing Diameter:75.200 mm; Design Units:METRIC; Limiting Speed (Grease):20700 rpm; d:55 mm; Ball Type:STEEL; Limiting Speed (Oil):41400 rpm; |
| T-544090/544118 | L:110 mm; Designation of housing:PA207-; Weight:1.48 kg; T min.:-40 °C; S:9.5 mm; T max.:100 °C; C0:15.2 kN; E:20 mm; Designation of bearing:ES207-23G2T04; H1:13 mm; |
| EE435102/435165 | C:11 kN; H:125 mm; Recommended tightening torque for set screw:3.9 Nm; Designation of bearing:SUC205-16; T max.:100 °C; S:14.3 mm; Weight:0.6 kg; d:25.4 mm; e:16 mm; B:34.1 mm; |
| EE833160X/833232 | Number of Bearings:Double; Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Retained:No; Flange O.D. H(φ):47; Bearing Material:Stainless Steel; Volume Discount:Available; |
| CR-10024 | C:11 kN; H:125 mm; Recommended tightening torque for set screw:3.9 Nm; Designation of bearing:SUC205-16; T max.:100 °C; S:14.3 mm; Weight:0.6 kg; d:25.4 mm; e:16 mm; B:34.1 mm; |
| LL771948/LL771911 | Precision Class:ISO P4S (ABEC 7/9); D:80 mm; R - Inner Ring To Clear Radius2:1.0 mm; C0 - Static Radial Rating:9430 N; Da - Outer Ring Backing Diameter:75.200 mm; Design Units:METRIC; Limiting Speed (Grease):20700 rpm; d:55 mm; Ball Type:STEEL; Limiting Speed (Oil):41400 rpm; |
| EE333137/333197 | G2 - Heat Generation Factor (Rib-Roller End):21; db - Cone Backface Backing Diameter:3.66 in; Cup Part Number:632D; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:28000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:16100 lbf; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.1 in; Y2 - ISO Factor10:2.78; G1 - Heat Generation Factor (Roller-Raceway)11:106; |
| T-LM654642/LM654610 | Bearing Retained:No; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Width T(mm):11; Bearing I.D. d(mm):30; Seals:ZZ (Double Shield); |
| EE971354/972100 | G2 - Heat Generation Factor (Rib-Roller End):21; db - Cone Backface Backing Diameter:3.66 in; Cup Part Number:632D; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:28000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:16100 lbf; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.1 in; Y2 - ISO Factor10:2.78; G1 - Heat Generation Factor (Roller-Raceway)11:106; |
| T-EE134100/134143 | Characteristic outer ring frequency, BPF0:4.12 Hz; Nlim (oil):18,000 rpm; D:47 mm; Static load, C0:5.85 kN; Fatigue limit load, Cu:0.27 kN; Max operating temperature, Tmax:120 °C; ra max:0.6 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.88 Hz; d:25 mm; |
| H852849/H852810 | Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6001; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; |
| T-H247535/H247510 | Dimension H:3.1 in; Dimension T:13.0 in; Dimension L:5.8 in; Series Type:Medium Series; Bearing UPC:013992035141; Cr - Dynamic Load Rating:58001 lbf; Dimension N:8.5 in; Support Type:Round Flange; Bearing - Housing - Seal:MSM70BRHRSS; Dimension P:0.7 in; |
| T-EE161400/161850 | Rolling Element Material:[Steel] Steel; Combination symbol:No; Outer Ring:With Outer Ring; Internal Symbol:No; Symbol of Bearing Ring Shape:No; O.D.(Ø):42; Type:Ball; Inner/Outer Ring Material:[Steel] Steel; Days to Ship:Quote; Load Direction:Radial; |
| T-67989/67920 | Rolling Element Material:[Steel] Steel; Combination symbol:No; Outer Ring:With Outer Ring; Internal Symbol:No; Symbol of Bearing Ring Shape:No; O.D.(Ø):42; Type:Ball; Inner/Outer Ring Material:[Steel] Steel; Days to Ship:Quote; Load Direction:Radial; |
Tapered Roller Bearings - NTN Global
A large variety of these bearings, including single, double, and four row arrangements, are in use both in metric and inch series. B-119. Type. Characteristics
Single row tapered roller bearings Industry Solutions : NTN
The single row tapered roller bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, metric series
Tapered Roller Bearings - NTN Global
Tapered roller bearings are designed so the tapered vertex of the raceway surfaces of the inner and outer rings and rollers converge at one point on the centerline of the bearing. ... A large variety of these bearings, including single, double, and four row arrangements, are in use both in metric and inch series
Double-row tapered roller bearings - NTN Global
oil. 1）Minimum allowable dimension for chamfer dimension r or r1. φD. C φd a. B1 r r1. ○ Double Row Tapered Roller Bearings. Back-to-back arrangement
Single row tapered roller bearings Industry Solutions : NTN
The single row tapered roller bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, metric series
LARGE BEARINGS Tapered Roller bearings - NTN Global
Table 1 Structure and characteristics of double row tapered roller bearings. Fig.1. Fig.2. E. 2α. Sub-unit dimensions. E : Cup small inside diameter, nominal
Double Row Tapered Roller Bearings - NTN Bearing Finder
Browse Double Row Tapered Roller Bearings in the NTN Bearing Corp. of America catalog including Item #,d,D,C,B1,r,Static Load Rating,Dynamic Load Rating