| HM261049/HM261010A | Rolling Element Material:[Steel] Steel; Combination symbol:No; Outer Ring:With Outer Ring; Internal Symbol:No; Symbol of Bearing Ring Shape:No; O.D.(Ø):42; Type:Ball; Inner/Outer Ring Material:[Steel] Steel; Days to Ship:Quote; Load Direction:Radial; |
| EE755285/755360G2 | C:11 kN; H:125 mm; Recommended tightening torque for set screw:3.9 Nm; Designation of bearing:SUC205-16; T max.:100 °C; S:14.3 mm; Weight:0.6 kg; d:25.4 mm; e:16 mm; B:34.1 mm; |
| T-H239649/H239610 | L:110 mm; Designation of housing:PA207-; Weight:1.48 kg; T min.:-40 °C; S:9.5 mm; T max.:100 °C; C0:15.2 kN; E:20 mm; Designation of bearing:ES207-23G2T04; H1:13 mm; |
| T-LM869448/LM869410 | Designation of open end cover:SCOE210-50; S:11 mm; s1:33.4 mm; d1:67.2 mm; Weight:2.61 kg; Recommended tightening torque for set screw:11.5 Nm; C0:23.2 kN; A1:32 mm; C:35.1 kN; A:60 mm; |
| EE833160X/833232 | G2 - Heat Generation Factor (Rib-Roller End):21; db - Cone Backface Backing Diameter:3.66 in; Cup Part Number:632D; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:28000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:16100 lbf; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.1 in; Y2 - ISO Factor10:2.78; G1 - Heat Generation Factor (Roller-Raceway)11:106; |
| CR-17001 | Holder Surface Treatment:Electroless Nickel P; Lateral Width L(mm):96; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Width T(mm):19; Bearing I.D. d(mm):25; Height H(mm):40; C Chamfered:Not Provided; |
| T-LM451349/LM451310 | Holder Surface Treatment:Electroless Nickel P; Lateral Width L(mm):96; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Width T(mm):19; Bearing I.D. d(mm):25; Height H(mm):40; C Chamfered:Not Provided; |
| EE655270/655345G2 | Precision Class:ISO P4S (ABEC 7/9); D:80 mm; R - Inner Ring To Clear Radius2:1.0 mm; C0 - Static Radial Rating:9430 N; Da - Outer Ring Backing Diameter:75.200 mm; Design Units:METRIC; Limiting Speed (Grease):20700 rpm; d:55 mm; Ball Type:STEEL; Limiting Speed (Oil):41400 rpm; |
| LM272235/LM272210G2 | Precision Class:ISO P4S (ABEC 7/9); D:80 mm; R - Inner Ring To Clear Radius2:1.0 mm; C0 - Static Radial Rating:9430 N; Da - Outer Ring Backing Diameter:75.200 mm; Design Units:METRIC; Limiting Speed (Grease):20700 rpm; d:55 mm; Ball Type:STEEL; Limiting Speed (Oil):41400 rpm; |
| 32084 | Bearing Retained:No; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Width T(mm):11; Bearing I.D. d(mm):30; Seals:ZZ (Double Shield); |
| T-67989/67920 | G2 - Heat Generation Factor (Rib-Roller End):21; db - Cone Backface Backing Diameter:3.66 in; Cup Part Number:632D; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:28000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:16100 lbf; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.1 in; Y2 - ISO Factor10:2.78; G1 - Heat Generation Factor (Roller-Raceway)11:106; |
| LM361649/LM361610 | G2 - Heat Generation Factor (Rib-Roller End):21; db - Cone Backface Backing Diameter:3.66 in; Cup Part Number:632D; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:28000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:16100 lbf; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.1 in; Y2 - ISO Factor10:2.78; G1 - Heat Generation Factor (Roller-Raceway)11:106; |
| T-HH926749/HH926710 | Designation of open end cover:SCOE210-50; S:11 mm; s1:33.4 mm; d1:67.2 mm; Weight:2.61 kg; Recommended tightening torque for set screw:11.5 Nm; C0:23.2 kN; A1:32 mm; C:35.1 kN; A:60 mm; |
| LL788345/LL788310 | Characteristic outer ring frequency, BPF0:4.12 Hz; Nlim (oil):18,000 rpm; D:47 mm; Static load, C0:5.85 kN; Fatigue limit load, Cu:0.27 kN; Max operating temperature, Tmax:120 °C; ra max:0.6 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.88 Hz; d:25 mm; |
Single row tapered roller bearings Industry Solutions : NTN
The single row tapered roller bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, metric series
Single row tapered roller bearings Industry Solutions : NTN
The single row tapered roller bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, metric series
Double-row tapered roller bearings - NTN Global
oil. 1）Minimum allowable dimension for chamfer dimension r or r1. φD. C φd a. B1 r r1. ○ Double Row Tapered Roller Bearings. Back-to-back arrangement
Double Row Tapered Roller Bearings - NTN Bearing Finder
Browse Double Row Tapered Roller Bearings in the NTN Bearing Corp. of America catalog including Item #,d,D,C,B1,r,Static Load Rating,Dynamic Load Rating
LARGE BEARINGS Tapered Roller bearings - NTN Global
Table 1 Structure and characteristics of double row tapered roller bearings. Fig.1. Fig.2. E. 2α. Sub-unit dimensions. E : Cup small inside diameter, nominal
Tapered Roller Bearings - NTN Global
A large variety of these bearings, including single, double, and four row arrangements, are in use both in metric and inch series. B-119. Type. Characteristics
Tapered Roller Bearings - NTN Global
Tapered roller bearings are designed so the tapered vertex of the raceway surfaces of the inner and outer rings and rollers converge at one point on the centerline of the bearing. ... A large variety of these bearings, including single, double, and four row arrangements, are in use both in metric and inch series