Spherical Roller Modifications
Industrial Bearings Solutions are often approached to modify as well as refurbish spherical roller bearings.Many companies are often operate under the misconception that once a bearing has been produced it can no longer be modified in any way. This is not true. Many modifications can be carried out post production.To give you an idea we have listed some typical modifications below:
Producing taper or parallel bores
Inner rings with extra close running accuracy (1/4 ABEC1) and marked to show high and low points of eccentricity
Outer rings with extra close running accuracy (1/4 ABEC1) and marked to show high and low points of eccentricity
Combinations of the above two features
Rings and rollers with TDC coatings
Outer ring with lubrication holes
Outer rings with reduced diameter tolerance
Outer rings with counter drilled lubrication hole
Bearings inspected to meet specific quality requirements
Lubrication holes and machined groove in the center of the OD
Case hardening rings and rollers
Tapped holes in the face of the inner and outer to facilitate lifting
Plugging of oil holes
Inner ring with reduced bore diameter tolerance
Lubrication holes in Inner ring and lubrication grooves in face of retainer
Various combinations of the options above!
If you require a spherical bearing to be modified in any way,contact us now and we will arrange for a prompt and competitive quotation.
Contact us now and let us show you exactly what we can do for you.