FE422Z2 One Way Clutch Bearing 14x22x6.3mm
With over 10170 full-service Industrial Bearings Solutions stores, our FE422Z2 One Way Clutch Bearing 14x22x6.3mm Stamped Steel Cage Type inventory is extensive and our parts are priced right. within 24 hours. This helps you LL521845 Cone Part Number maximize your productivity by saving time and your hard-earned dollars.
Product Details
| Cone Part Number | LL521845 |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 24000 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 6230 lbf |
| d | 4.1250 in |
| B - Cone Width | 0.5938 in |
| R - Cone Backface To Clear Radius3 | 0.06 in |
| da - Cone Frontface Backing Diameter | 4.37 in |
| db - Cone Backface Backing Diameter | 4.45 in |
| Ab - Cage-Cone Frontface Clearance | 0.12 in |
| Aa - Cage-Cone Backface Clearance | 0.01 in |
| a - Effective Center Location4 | 0.29 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 | 3580 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 13800 lbf |
| C0 - Static Radial Rating | 24000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 2400 lbf |
| K - Factor8 | 1.49 |
| G1 - Heat Generation Factor (Roller-Raceway) | 104.7 |
| G2 - Heat Generation Factor (Rib-Roller End) | 110.1 |
| Cg - Geometry Factor | 0.118 |
Recommended Products
-
M9101 Inch Needle Roller Bearing 14.288x19.05x15.88mm -
B910 Inch Needle Roller Bearing 14.288x19.05x15.88mm -
B912 Inch Needle Roller Bearing 14.288x19.05x19.05mm -
M9121 Inch Needle Roller Bearing 14.288x19.05x19.05mm -
15TAB04DU Ball Screw Support Bearing 15x47x30mm -
BH98 Inch Needle Roller Bearing 14.288x20.638x12.7mm