SBG35FLL-C-K1 Linear Guide Block / Linear Motion Bearing 100x138.1x48mm
With over 10170 full-service stores, our 53.975x120.65x41.275 SBG35FLL-C-K1 Linear Guide Block / Linear Motion Bearing 100x138.1x48mm inventory is extensive and our parts are priced right. within 24 hours. This Industrial Bearings Solutions helps you maximize your productivity by saving time and your hard-earned dollars.
Product Details
| Bearing number | 4T-621/612 |
| Size (mm) | 53.975x120.65x41.275 |
| Bore Diameter (mm) | 53,975 |
| Outer Diameter (mm) | 120,65 |
| Width (mm) | 41,275 |
| d | 53,975 mm |
| D | 120,65 mm |
| T | 41,275 mm |
| B | 41,275 mm |
| C | 31,75 mm |
| ra1 max. | 3,3 mm |
| a | 14,4 mm |
| Da | 105 mm |
| db | 63 mm |
| ra max. | 3,5 mm |
| da | 70 mm |
| Db | 110 mm |
| Weight | 2,21 Kg |
| Basic dynamic load rating (C) | 172 kN |
| Basic static load rating (C0) | 213 kN |
| (Grease) Lubrication Speed | 3 300 r/min |
| (Oil) Lubrication Speed | 4 400 r/min |
| Calculation factor (e) | 0,31 |
| Calculation factor (Y0) | 1,05 |
| d1 | 84 mm |
| e | 0.31 |
| Y2 | 1.91 |
| Y0 | 1.05 |
| Mass | 2.21 kg |
| Dynamic load, C | 172 kN |
| Rating life coefficient, A2 | 1.4 |
| Static load, C0 | 213 kN |
| Fatigue limit load, Cu | 26 kN |
| Nlim (oil) | 4,400 rpm |
| Nlim (grease) | 3,300 rpm |
| Min operating temperature, Tmin | -40 °C |
| Max operating temperature, Tmax | 120 °C |
| Characteristic cage frequency, FTF | 0.42 Hz |
| Characteristic rolling element frequency, BSF | 5.57 Hz |
| Characteristic outer ring frequency, BPF0 | 6.22 Hz |
| Characteristic inner ring frequency, BPFI | 8.78 Hz |
| ra max | 3.5 mm |
| r1a max | 3.3 mm |
Recommended Products
-
RB24025UC0 Separable Outer Ring Crossed Roller Bearing 240x300x25mm -
RB25025U Separable Outer Ring Crossed Roller Bearing 250x310x25mm -
RB24025UC1 Separable Outer Ring Crossed Roller Bearing 240x300x25mm -
RB25025C1 Separable Outer Ring Crossed Roller Bearing 250x310x25mm -
CSK 12 One Way Clutch Bearing / Sprag Freewheel Backstop 12x32x10mm -
RB24025UUC1 Separable Outer Ring Crossed Roller Bearing 240x300x25mm